
HEXATONE
Dense, static drones that come to life when you move the knobs. Six analog square-wave oscillators are split into two blocks of three, and the oscillators inside each block are coupled — changing one tone changes the behaviour of the others. From slow pulses and rhythmic beating to rough, buzzing noise textures. HEXATONE is the new version of the BIGZUN Drone Generator, now in a much narrower 6 HP panel instead of 10 HP.
What's in the box
1 × HEXATONE PCB with all SMD components already soldered
1 × HEXATONE front panel, 6 HP (black)
6 × potentiometer
4 × 3.5 mm jack with nut
1 × LED
1 × 10-pin power header
1 × power cable
You only solder the potentiometers, the jacks, the LED and the power header (through-hole).
Features
- The Drone Generator sound in only 6 HP — it fits where a 10 HP module would not
- Six analog square-wave oscillators (CMOS Schmitt trigger) in two coupled blocks of three
- Every oscillator has its own pitch knob — clockwise = higher
- Separate outputs for each block (OUT 1, OUT 2) plus two MIX jacks
- MIX is dominated by Block 2 — it works best as a trigger / modulation source, e.g. for the XOR Drifter
- Responds strongly to knob movement — ideal for performed, shifting drones
- Fully analog: no microcontroller, no menus
- Reverse-polarity protection, power LED
Specifications
| Outputs | OUT 1 (Block 1, oscillators 1–3), OUT 2 (Block 2, oscillators 4–6), 2 × MIX |
|---|---|
| Controls | 6 pitch knobs (one per oscillator) |
| Range | from slow pulses up to about 7.5 kHz |
| Power | +12 V, about 17–36 mA depending on knob settings; 10-pin header |
| Format | Eurorack, 6 HP |
| Line | Berlin |
| Version | DIY kit |
User manual
Videos
HEXATONE — 6 Oscillators in 6HP | Eurorack Drone Synth Demo







