DIY kit
MIX6
Passive 6-channel mixer
6 HPEurorackDIYPassive
Six inputs with level controls mixed to one output in 6 HP — a compact passive mixer for audio or CV, no power required.
What's in the box
1 × MIX6 PCB (black)
1 × MIX6 front panel, 6 HP (black)
6 × resistor 100 kΩ 1 % metal film
6 × potentiometer B100K, 9 mm, vertical
7 × 3.5 mm mono jack, switched, with nut
4 × mounting screws
All through-hole parts — no SMD soldering. Beginner level, about 45–60 minutes.
Features
- 6 inputs with individual level controls, 1 mix output
- Passive — no power and no ribbon cable needed
- Unused inputs stay silent
- Channel level does not change with the number of patched inputs
Specifications
| Inputs | 6 |
|---|---|
| Outputs | 1 |
| Controls | 6 × level |
| Power | none (passive) |
| Format | Eurorack, 6 HP |
| Line | Berlin |
| Version | DIY kit |
User manual
Building the kit
Build guide: step-by-step assembly instructions.
Interactive BOM: the parts list with a map of the board. Click a part to see where it goes and tick off what you have already soldered.
