DIY kit
MUTE
Quad passive mute
4 HPEurorackDIYPassive
Four independent mute channels with latching push switches. Press to mute — the latched button sits lower, so you can see the state at a glance.
What's in the box
1 × MUTE PCB (black)
1 × MUTE front panel, 4 HP (black)
8 × 3.5 mm jack with nut
4 × latching push switch, 7 × 7 mm
4 × round black cap
2 × M3 mounting screws
No resistors or capacitors — only 12 through-hole parts on the board.
Features
- 4 independent channels (IN → OUT)
- Latching 7 × 7 mm push switches — pressed = muted
- Muted output is tied to ground: no bleed-through, no floating input on the next module
- Passive — no power needed
- All through-hole parts — easy hand soldering
Specifications
| Channels | 4 |
|---|---|
| Jacks | 8 (4 in, 4 out) |
| Controls | 4 × latching push switch |
| Power | none (passive) |
| Format | Eurorack, 4 HP |
| Line | Berlin |
| Version | DIY kit |
User manual
Building the kit
Build guide: step-by-step assembly instructions.
Interactive BOM: the parts list with a map of the board. Click a part to see where it goes and tick off what you have already soldered.
