Catalog / Noise & Effects / LADDER

Berlin
LADDER
Analog 24 dB ladder filter · two outputs
A classic four-pole transistor ladder low-pass in 6 HP: discrete transistor pairs, real capacitors between the stages and an exponential converter for the cutoff. The result is the round, warm and slightly creamy low-pass sound known from vintage synthesizers — from soft, dark basses to squelchy resonant sweeps and a clean sine wave when the filter self-oscillates. Two outputs work at the same time: the deep 24 dB OUT 24 and the brighter 12 dB OUT 12.
View on ModularGrid ↗plan your case with this module
Features
- Fully analog transistor ladder low-pass — no microcontroller, no menus
- OUT 24 (4-pole, 24 dB/oct) and OUT 12 (2-pole, 12 dB/oct) at the same time
- Resonance up to self-oscillation (from about 85 % of the rotation) — the filter becomes a sine oscillator
- DRIVE: up to about the middle clean, further clockwise warm saturation
- CV input with CV AMT, up to about 1 octave per volt (exponential)
- Bass compensation: at high resonance the low end drops only about 4–5 dB instead of about 14 dB — no extra knob
- Perfect for basses, leads, acid and squelchy sequences, dark pads, percussive pings and Berlin School sequencer lines
Specifications
| Inputs | IN (about 100 kΩ, up to 10 Vpp, ±12 V safe), CV |
|---|---|
| Outputs | OUT 24, OUT 12 (AC-coupled; up to about 8–11 Vpp with DRIVE at maximum; self-oscillation about 2–4 Vpp on OUT 24, 5–7 Vpp on OUT 12) |
| Controls | FREQ, RES, DRIVE, CV AMT (clockwise = more) |
| Cutoff range | about 20 Hz … 16 kHz (about 10 octaves) |
| CV | about 1 oct/V with CV AMT at maximum (approximate, not for precise tuning) |
| Power | ±12 V, about 6–8 mA per rail; 10-pin header, reverse-polarity protected |
| Format | Eurorack, 6 HP |
| Line | Berlin |
User manual
Videos
BIGZUN LADDER – Analog Transistor Ladder Filter in 6HP | Acid, Bass & Self-Oscillation Demo


