Home / PCB + Panel / GLIDE
PCB + Panel
GLIDE
Dual slew limiter / portamento
4 HPEurorackPCB + PanelActive
A compact dual slew limiter in 4 HP: when the input jumps, the output follows smoothly at a constant rate — portamento, gentle envelopes and soft transitions between CV values.
What's in the box
1 × GLIDE PCB with all SMD components already soldered
1 × GLIDE front panel, 4 HP (black)
Through-hole parts (potentiometers, jacks, power header) are not included — the full part list is in the build guide and the interactive BOM.
Features
- Two independent channels, A and B, each with its own RISE and FALL knobs
- IN B is normalled to IN A — one CV, two different glides
- Linear slope: constant rate in V/s
- Time range from about 1 ms per 1 V to about 21 s per 10 V
- Portamento on sequencer pitch CV, envelopes from gates (RISE = attack, FALL = release), LFO shaping, smoothing random voltages
- Reverse-polarity protection diodes on both rails
Specifications
| Inputs | IN A, IN B (±10 V, safe up to ±12 V, approx. 1 MΩ; IN B normalled to IN A) |
|---|---|
| Outputs | OUT A, OUT B (−10 … approx. +9.7 V, 1 kΩ) |
| Controls | RISE A, FALL A, RISE B, FALL B (clockwise = slower) |
| Time range | approx. 1 ms per 1 V … approx. 21 s per 10 V |
| Depth | approx. 25 mm |
| Power | ±12 V, 10-pin header; approx. 1.5 mA typical, up to 8 mA per rail |
| Format | Eurorack, 4 HP |
| Line | Berlin |
| Version | PCB + Panel |
User manual
Building the module
Build guide: step-by-step assembly instructions.
Interactive BOM: the parts list with a map of the board. Click a part to see where it goes and tick off what you have already soldered.
Videos
GLIDE – Dual Slew Limiter & Portamento, Analog | 4 HP | BIGZUN
